Product Operation - senya EASYOU SYIR-I016 Manual De Instrucciones

Linen (steam)
3. Turn the temperature control knob until it is set at the appropriate mark.
Advice : First separate the articles to be ironed according to the ironing temperature required.
For example : wool with wool, cotton with cotton etc... Start with the articles requiring a low
temperature, then as the iron warms up, iron the articles requiring a higher temperature.
Filling the water tank :
1. Open the water tank (Fig 1)
2. Fill the measuring cup
3. Fill in the water tank through the opening (Fig 2)
Advice : It is advisable to use only distilled or demineralised water. Do not store your iron with
water still in the tank.
III.2 PRODUCT OPERATION
Dry or Steam ironing :
1. Fill in the iron as described above in:Filling the water tank
2. Plug the Charging Base into the power socket, the Charging Base LED will light up blue.
3. Adjust the Temperature control knob(Fig A) according to different garments , in
above:"Selecting the temperature",at the same time selecting whether the Steam switch(Fig B)
is On or Off
Note:
 Dry ironing:Do not use the steam function, set the Steam switch to Off
temperature control knob to Low (●) or Medium(●●) temperature.
Steam ironing:Use the steam function , set the Steam switch to On

temperature control knob to a High temperature (●●● or Max),Otherwise, water could leak
from the Soleplate.
Max
Fig1
according to your needs.
High temperature
Fig2
41
Fig3
and adjust the
, and adjust the