JETFON JF 20 Manual De Instrucciones página 3

SWITCH-MODE DC
ADJUSTABLE POWER
SUPPLY
JF 20 / JF 40 / JF 60
INSTRUCTION MANUAL
1.- INFORMATION:
This device complies with Directive 2012/19/EU on waste electrical and electronic
device (WEEE). This means that this product must be disposed of at a designated
collection point for the recycling of waste electrical and electronic device, with the
intention of being either recycled or dismantled in order to reduce any impact on
the environment. For more information, please contact your distributor, salesper-
son or regional administration
Electronic products that have not been disposed of in this way are potentially dangerous for
the environment and public health due to the possible presence of dangerous.
This device complies with Directive 2011/65/EU and its subsequent amendments
Directive 2015/863/EU on the restriction on the use of certain hazardous substan-
ces in electrical and electronic device (RoHS).
This device is designed for indoor use only.
• This instruction manual has been created with the intention of supplying as much informa-
tion as possible. PIHERNZ COMUNICACIONES, S.A. is not responsible for any
omissions or any errors in printing or translation.
• The total or partial reproduction of this Instruction Manual is forbidden without prior written
authorization from PIHERNZ COMUNICACIONES, S.A.
•
EU contact: PIHERNZ COMUNICACIONES, S.A.
Cl Comerç, 2. 08980 Sant Feliu de Llobregat-Barcelona (Spain).
Made in P.R.C.
2.- INTRODUCTION:
- We thank you for purchasing this DC Power Supply, which incorporates the charging
function for mobile devices, tablets, etc. We are convinced that you will be highly satisfied
with the quality and performance of this product.
- This manual includes important safety and operation instructions. Read this manual
carefully before using this product.
- Keep this manual for future references.
- The DC Power Supply that you have just acquired has been manufactured in accordance
with strict quality control by the manufacturing company.
- This product is supplied in packaging that safeguards against transport knocks and
vibrations, which guarantees its excellent condition at the time of purchase.
- This Power Supply is characterised by its high performance and compact design. It is
specially designed for the VDC power supply of radio device and for charging mobile devices.
3.- SAFETY PRECAUTIONS:
- This product has no components that can be repaired by the user. Always consult the
Technical Service for any repairs.
- Do not attempt to open the Power Supply casing, as there are no user serviceable parts
inside, and this may affect the warranty.
- This DC Power Supply is intended for indoor use only; install on a stable surface in a dry
and well-ventilated environment.
- Do not allow the DC Power Supply to become wet.
- The DC Power Supply may become warm during use or emit a slight buzzing sound; this is
quite normal and can be disregarded.
- Connect the DC Power Supply to an AC 230 VAC/50 Hz wall outlet when in use; at all other
times disconnect from AC mains outlet.
- Do not connect a device to the Power Supply that requires a current greater than the
supplied 20 A (JF 20 model), 40 A (JF 40 model) or 60 A (JF 60 model).
- Make sure that the polarity is correct when connecting a device to the Power Supply, as this
device may be damaged if incorrect connections are performed. Red cable to positive (+)
terminal and black cable to negative (-) terminal.
4.- CHARACTERISTICS:
- Lightweight DC Power Supply.
- Compact dimensions 260 (L) x 190 (W) x 105 (H) mm.
- Variable output voltage: 5-15 VDC.
- Supplied current setting from 0-20 A (model JF 20) / 0-40 A (model JF 40) / 0-60 A
(model JF 60).
- LCD screen for displays of set voltage and set current, and displays of nominal current.
- Use as a DC Power Supply with fixed output voltage 13.8 VDC.
- Suitable for powering all types of 12 VDC devices.
- It incorporates USB connector for charging mobile devices, tablets, etc.
5.- OPERATION:
- Switch off the Power Supply before connecting it to a wall socket.
- Connect the power cable of the DC Power Supply to a 230 VCA wall outlet.
- Switch on the DC Power Supply with the [ON/OFF] switch on the back of the unit; the LCD
display will illuminate.
- Adjust the output voltage (5-15 VDC) with the [Adj. Vol.] knob. The upper half of the LCD
screen displays the set voltage.
- Turn the [Amp. Adj.] knob to set your required maximum current cut-off point. The lower half
of the LCD screen will display the set current.
- Select the 13.8 VDC fixed voltage output or the adjustable 5-15 VDC voltage by using the
[1/0] switch on the front panel.
- Connect the device to the DC Power Supply by ensuring that the polarity is correct; the red
terminal is positive (+) and the black terminal is negative (-).
- Use the USB connector (5 V/2 A) for charging mobile devices.
6.- TECHNICAL SPECIFICATIONS:
Input voltage: 220-240 VAC ~ 50/60 Hz.
•
• Output voltage: 5-15 VDC (adjustable),
13.8 VDC (fixed) and 5 VDC (USB connector)
• Adjustable output current: 0-20 A (JF 20 model)
/ 0-40 A (JF 40 model) / 0-60 A (JF 60 model)
ENGLISH - 03
• Output connectors: 4 mm diameter
banana/clamp terminals witch 5-15
VDC adjustable output voltage / 12
VDC/10 A vehicle cigarette lighter
socket / 5 VDC/ 2 A USB connector.
• Insulation type: Class I.