Publicidad
Idiomas disponibles
Idiomas disponibles
SETUP
CHECK LIST
To check the parts included in the box, consult the part list inside this manual. Verify that the equipment components represent
the model that you had intended to purchase. In case of any damaged or missing parts at the time of purchase, visit our
website bestwaycorp.com/support.
INSTALLATION
• For the installation instruction refer to the illustration steps
May not reflect actual product. Not to scale.
• Bestway will not be responsible for any damage caused to the Skimatic Filter Pump due to mishandling or failure to follow
these instructions.
• It is imperative to check that the hydraulic connectors are not obstructed.
• Do not dry run the Skimatic Filter Pump. Make sure both the pool's inlet and outlet valves are fully covered by water
before operating the Skimatic Filter Pump.
MAINTENANCE
• Make sure that the Skimatic Filter Pump is unplugged before any maintenance.
• For the maintenance instruction refer to illustration steps
May not reflect actual product. Not to scale.
• To optimize the Skimatic Filter Pump performance and for sanitary reasons, we suggest replacing the filter cartridge with
a new one every two weeks.
STORAGE
• Remove all accessories; be sure that Skimatic Filter Pump is completely clean and dry before the storage. If all the parts
are not completely dry, mold may result.
• Before storage, remove and dispose of the filter cartridge.
• We strongly recommend disassembling the Skimatic Filter Pump when the environment temperature is below 50ºF / 10ºC.
• Store the Skimatic Filter Pump in a dry place with a moderate temperature between 50ºF / 10ºC and 100ºF / 38ºC.
WARRANTY TERMS
For information concerning warranty terms, visit our website at: www.bestwaycorp.com.
inside the manual. Drawings are for illustration purposes only.
inside this manual. Drawings are for illustration purposes only.
3
Publicidad
