Descargar Imprimir esta página

Cleaning And Maintenance - Wilfa COOL 9 CONNECTED Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 326

CLEANING AND MAINTENANCE

EN
Warning:
• Before cleaning the air conditioner, please turn off the unit and disconnect
power. Otherwise, it may cause electric shock.
• Do not wash air conditioner with water. It may cause electric shock.
• Do not use volatile liquid (such as thinner or gas) to clean the air conditioner.
Otherwise, it may damage the appearance of air conditioner.
• Do not splash water or any other liquid into it, it may damage the plastic
components, even cause electric shock.
CLEAN OUTER CASE
If there is dust on the surface of outer case, please use soft towel to wipe it. If the
outer case is very dirty (such as grease), please use neutral abluent to wipe it.
CLEAN GRILLE
Use cleaner or soft brush to clean it.
CLEAN FILTER
1. Remove the filter.
– Press the clasp, and then remove the filter 1.
– Pull out the filter 2.
2. Clean filter
– Use cleaner or water to clean the filter. If the filter is very dirty (such as
grease), use warm water 40°C (104°F) mixed with neutral detergent to clean
it and then put at shady place to dry it.
3. Install the filter.
– After the filter is cleaned and dried, reinstall it correctly.
Note:
• The filter should be cleaned about once every three months. If there's much
dust in the operation environment, you can increase clean frequency.
• Do not dry the filter with fire or hair drier. Otherwise, it may be deformed or
catch fire.
CLEAN HEAT DISCHARGE PIPE
Remove the heat discharge pipe from air conditioner, clean and dry it, and
then reinstall it. (For the method of installation and removal, please refer to the
instruction for "installation and disassembly of heat discharge pipe").
INSTRUCTION MANUAL · AIR CONDITIONER
20

Publicidad

Solución de problemas

loading