Lindy 42320 Manual De Usuario página 3

User Manual
Installation
Front
SELECT button: push to change input
•
Port status LEDs: the selected input port will illuminate
•
• USB Type C Input port 1-2: connect the Type C devices using two Type C Male to Male USB 3.2
Gen 2 cables (included), PD up to 100W is supported only on port 2
• 3.5mm AUDIO port: connect 3.5mm speakers, headphones or microphone
Rear
USB Type C PD port: connect a compatible Type C power supply (not included) if required
•
DisplayPort OUT port: connect a DisplayPort monitor using a DP Male to Male cable (not
•
included)
• USB 2.0 Type A ports: connect USB devices such as mouse, keyboard or mass storage device
Operation
Computer port selection can be made using the push button on the front panel or via auto switching, if
there is only one active source connected, the unit switches automatically to that port.
We suggest using the included USB Type C 3.2 Gen 2x2 E-marked 0.5m cables and a DisplayPort cable
not longer than 3m (not included). Please reduce DisplayPort cable length if the video signal is not
stable.
Please Note
For device charging, a Limited Power Source (LPS) certified USB Type C PD Power Adapter over
65Watt is recommended (not included).
For video output to work through a USB Type C connection, the connected sources must support DP Alt
Mode. Smartphone and tablets with DP Alt Mode support can only display a mirror image.
The USB Fast Role Swap feature is not supported, devices may reconnect when removing or adding a
USB PD connection.
English