Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE USER FEATURES
Double tap this button to ENTER remote user option. TAP
"
/
" to navigate the user features left or right and a
x 2
single tap of the "
" to enter selected features.
FEATURE
FUNCTION/DESCRIPTION
This feature will allow you to
select a different vehicle
image for the remote LCD
LCD
display. There are 3 options
view
use "
" to select, the
lock/unlock icon will move
to the next feature.
This feature
enables/disables FULL
Alarm or Alarm Remote
"Full"
Start mode allowing the
remote to receive alarm
trigger alerts.
This feature
Enables/Disables Valet
mode. NOTE to enable
Valet
Valet mode using T-13,
vehicle ignition/key must
be in the on position.
To reprogram your remote, cycle the key in the ignition 5 times within 7
seconds. Parking lights will flash. Then tap the Lock button on your remote.
Repeat for any additional remotes. All remotes must be programmed during one
sequence. If you receive two parking light flashes, your Compustar has exited
remote programming mode and you must retry.
Questions/comments? Contact us at 888-820-3690 from 8 AM to 5 PM
PST.Also please visit www.compustar.com for a complete user's manual.
2WT13R
-SF_QuickCard line 20200810.indd 2
QUICK START CARD
FEATURE
FUNCTION/DESCRIPTION
This feature will allow the
volume of the remote
chime to be adjusted at 3
Sound/
levels. When set to off, the
Vibrate
remote will be silent with
"vibrate". Use "
" to
select level.
This feature will allow the
LCD screen brightness to
LCD
brightness
be adjust by 3 levels. Use
"
" to select level.
This Feature will allow the
screen timeout to be
Screen
adjusted between 4 and 8
time out
seconds. Use "
" to
select.
8102REUCL002200 // 2WT13R Guide REV1.0
These features allow
AUX 1/2 to be displayed
AUX 1/
as optional functions, or
2 Config
turned off. Use "
" to
view options.
This feature allows the
language of the remote
to be changed between
Language
English, French,
Spanish. Use "
" to
view options.
This feature allows the
remote to display vehicle
internal Temperature (If
Tempurature
Thermistor is installed) in
Fahrenheit or Celcius.
Use "
" to select.
This will display the
Remote
remote serial number for
ID
idetification.
This feature will power
down the LCD remote.
Power
Tap and hold "
" for
down
4 seconds.
2WT13R-SF
This feature will allow
Drive lock/Ignition
controlled Door locks to
Drive
be enabled/disabled.
lock
NOTE additional dealer
programming is required.
When 2nd car mode is
enabled, this remote can
2nd car
be programmed to and
mode
control a 2nd vehicle
using a compatible
system.
This allows the user to
disable the horn/siren
output withkeyless-remote
Siren-Horn
start functions. NOTE:
on/off
when using this feature
the "pre warn" chirps will
also be disabled.
This will enable/disable
the the shock sensor if
Shock
there is one installed.
Sensor
NOTE: does NOT apply
on/off
to remote start only
system.
This will enable/disable
the proximity unlock
Proximity
feature of the remote.
UNLOCK
NOTE additional dealer
programming required.
Firstech, LLC. | 2
2020/08/10 10:20:21
Publicidad
