JBL SUB80P Manual Del Propietário página 6

CONNECTING THE SUBWOOFER TO A RECEIVER OR PREAMP/PROCESSOR WITH LINE OUTPUTS
Use this installation method for receivers and preamp/processors that do not have a dedicated subwoofer output but do have preamp-level
(volume-controlled) line outputs.
Connect one end of a stereo RCA cable (not supplied) to the receiver's or preamp's line outputs and the other end to the subwoofer's Line-Level
L/R In connectors. Set the subwoofer's Input Mode switch in the "Normal" position.
After you have made and verified all connections, plug the subwoofer's AC Power Cord into a working AC outlet.
CONNECTING THE SUBWOOFER TO A TRIGGER VOLTAGE SOURCE
Set Input Mode
Switch to "Normal"
LINE-LEVEL
OUTPUTS
L R
Stereo RCA Cable (not supplied)
12V
TRIGGER
OUTPUT
Trigger Cable
(supplied)
SUB80P
SUB80P
6