Overheat Protection; Cleaning And Maintenance - Melchioni Family WARMY WALL Folleto De Instrucciones

REMOTE CONTROL VIEW
1. Remote control, please use Lithium battery CR2025 3V.
2.The remote control power button is labelled as such

OVERHEAT PROTECTION

This heater is protected with an overheat protection that switches off the appliance automatically in
case of overheating. For example: due to the total or partial obstruction of the vents. In this case,
unplug the appliance, wait about 30 seconds for it to cool and remove the object which is obstructing
the vents. Then switch it back on as described above. The appliance should now operate normally.
If the problem persists, please contact Customer Service for assistance.

CLEANING AND MAINTENANCE

Attention: before cleaning the appliance, switch off, unplug and wait for before it has
completely cooled down.
• To clean the body use a soft damp cloth; do not use abrasive products.
• Do not submerge any part of the heater in water or other liquids; if this should happen, do not
put your hands into the liquid, firstly remove the plug from the power socket. Carefully dry the
appliance and check that all the electrical parts are dry: if in doubt, contact professionally
qualified personnel.
• From time to time clean the grid to remove fluff, dust or other deposits, to improve the
performance. Use a vacuum cleaner or a cloth.
• If you decide not to use the appliance any more, we recommend making it inoperative by
cutting the power cord (after making sure you have disconnected the plug from the socket)
and make dangerous parts harmless if children are allowed to play with them.
• Used battery of the remote control must be disposed of at appropriate collection centres at
your local authority or in suitable containers. In this way, local laws will be respected.
1."ON/OFF" Main power button
2."24H" Setting timer from 1-24 hours
3."MODE" COLD,WARM,HOT 3 setting for selection
4."Swing" Louver swing up and down
5."LOCK" Child-Lock function for heater
6."AUTO" Window Open Function
7."Tem."
Display real time
8."Delay"
Set temperature for weekly function
9."W.Timer" Set the timer of one week
10."+"
Increase
11."-" Decrease
12."Set" Set real time