Publicidad
KNOW HOW TO IDENTIFY THE SYMPTOMS OF HEAT STROKE:
Depending on the conditions in which the heated gloves are used, you may become a victim of heatstroke. These
are the symptoms of heatstroke:
• Extreme perspiration, clammy skin, pale or reddened skin, general weakness, dizziness, confusion, nausea, vomiting,
headaches, cramps, fast and shallow breathing.
• If you notice any one of these symptoms, reduce the temperature of your body by sitting or lying down in a cool
place, drinking sufficient amounts of cool water, using a fan and applying wet cloths to the skin to reduce the
body's temperature.
WARNING: to avoid the possibility of heat stroke, disconnect the gloves if you are wearing them in an environment
with a considerably higher temperature.
• Do not place any explosive items (gas lighter, matches, etc.) in the pockets intended for the battery.
• Do not wear this gilet in a storm, rain or in a high pressure working environment.
• These gloves should not be worn by pregnant women, young children, physically impaired people, anyone
insensitive to heat, or anyone with poor circulation.
• These gloves should not be worn by anyone suffering from a serious cardiovascular disease or who has a pace-
maker. In case of doubt, please contact your attending physician.
• Do not use this product if it has any defect.
SPECIFICATIONS
• Charger / back up battery 3000 mah/ 5v
• Type of battery: lithium polymer
• Input: 5 v/2 a (max.)
• Capacity: 3000 mah/11.1 W
• Output capacity: 5 w (max.)
• Load resistance: 3 Ω - 200 Ω
INSTRUCTIONS FOR USE - QUICK START
- To achieve a full charge, use the 61 cm dual micro USB cable to charge your set of 2
batteries 3000 mAh/ 5 V for approximately 3.5-4.5 hours or 7-9 hours depending on
the charging method.
- The LED power supply indicator light indicate the battery life and charging status
of the 3000 mAh/ 5 V batteries.
LED POWER INDICATORS:
• 1 LED: 25% POWER
• 2 LEDs: 25-50% POWER
• 3 LEDs: 50-75% POWER
• 4 LEDs: 75-100% POWER
Battery power LED indicator lights
Charger / Back up battery
Micro USB input port USB 5 V / 2A (max.)
USB output port 5 V / 1A
- - To power each of your heated gloves, connect the 3000 mAh/ 5 V batteries to the
USB cables in the concealed pockets in the heated gloves. Press the temperature
control button in the heated gloves and hold it down for 3 to 5 seconds until the
LED light turns RED. Then use the control button on the heated gloves to select your
desired heating parameters.
- Unplug the 3000 mAh/ 5 V batteries when not in use to maintain their battery life.
8
CHARGING THE 3000 MAH/ 5V BATTERIES
Use the micro USB cable supplied to plug the 3000 mAh/ 5V battery into a USB
5V/2A mains adapter (not supplied) or the USB port of a computer and charge it.
Duration to fully charged: 3.5-4.5 hours (using a mains adaptor) or 7-9 hours
(using a computer).
CHARGING OTHER DEVICES
Connect the large end of the USB cable to the USB port in the 3000 mAh/ 5V battery,
then connect the micro USB end to your USB device.
Switch on the 3000 mAh/ 5V battery to charge your device.
POWER YOUR HEATED GLOVES
Connect each 3000 mAh battery to the USB cables in the concealed pockets in the
heated gloves. Press the temperature control button in the heated gloves and hold
it down for 3 to 5 seconds. The LED indicator light will turn RED.
Then use the control button on the heated gloves to select your desired heating
parameters.
CAUTION
1. Use with caution. Never use the product while sleeping or unconscious.
2. Do not allow the 3000 mAh/ 5 V batteries to enter into contact with water or other
liquids. If water or other liquids penetrate the interior of the batteries, immediately
unplug the product from the batteries. Continuing to use a potentially damaged
product can lead to a fire or an electric shock.
3. Do not place this product near to a source of heat and do not expose the batteries
to a flame or direct source of heat, as this could cause an explosion.
4. Do not try to dismantle or modify the 3000 mAh/ 5 V batteries, the heated gloves
or any part of these products.
5. Recycle the batteries according to local regulations.
6. To reduce the risk of injury or incorrect use of this item, please do not use the
product before reading all of the instructions, warnings and maintenance information.
7. By nature, battery heated products can cause burns or discomfort. When using a
Dual USB micro cable
USB mains adapter
OR
USB port
LED temperature settings of the button on the top of each heated glove.
Grey = off
Red = 100% heat
White = 70% heat
Green/blue = 40% heat
heated garment, frequently check the skin under the heated areas to avoid burns.
Be aware of early warning signs or sensations of burning and remove the heat
source before any burns occur.
8. Consult a doctor before using the product on sensitive skin or if you have a medical
device affecting the circulation or skin sensitivity.
9. In the rare event that you suffer any discomfort or sensation of overheating during
the use of any product, immediately stop using it. Take off the gloves and disconnect
the batteries.
10. Do not use the heated gloves when folded.
11. Do not use it if creased or crumpled.
12. When the appliance is likely to be used for an extended period, the settings should
be adjusted to the recommended level for continuous use.
13. Do not use damp.
9
Publicidad
