Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Instructions for the installer
Installation
This appliance is not provided with a com-
bustion product discharge. It is recom-
mended that it be installed in sufficiently aer-
ated places, in terms of the laws in force. The
quantity of air necessary for combustion
must not be below 2.0 m³/h for each kW of
installed power.
See table of burner power.
Gas hookup
Fig. 5. Connect the appliance to the gas cyl-
inder or to the installation according to the
prescribed standards in force, and ensure be-
forehand, that the appliance matches the
type of gas available. Otherwise, see "Adap-
tation to various types of gas". Furthermore,
check that the feed pressure falls within the
values described on the table: "Specifica-
tions".
Rigid/semi rigid metal connection
Carry out the connection with fittings and
rigid (or flexible) metal pipes. Avoid stressing
the inner parts of the appliance.
Note: After completing the installation, check
the perfect sealing of the entire connection
system, by using a soapy solution.
Installation
Fig. 3. The appliance can be fitted into a
working area as illustrated on the corre-
sponding figure. Before positioning the hob,
fit the seal (indicated with an "X") around the
entire periphery of the cutout in the worktop.
Figura 5
Gas Type by Country
Set for L.P. gas, and includes a
Mexico
conversion kit for Natural gas.
Set for Natural gas, and in-
Argentina
cludes a conversion kit for L.P.
gas.
Set for L.P. gas, and includes a
Brazil
conversion kit for Natural gas.
Set for L.P. gas, and includes a
Colombia
conversion kit for Natural gas.
37
Publicidad
