Publicidad
Idiomas disponibles
Idiomas disponibles
Safety instructions
PLASMA CUTTING SERIES EQUIPMENT
1.3 Symbol chart
Note that only some of these symbols will appear on your model.
28
PLASMA CUTTING SERIES EQUIPMENT
2.1 Brief Introduction
CUT 50PD, CUT 70PD plasma cutting machines adopts the latest pulse width modulation
(PWM) technology and insulated gate bipolar transistor (IGBT) power module, which can change
work frequency to medium frequency so as to replace the traditional hulking work frequency
transformer with the cabinet medium frequency transformer. Thus, its characterized with portable,
small size, light weight, low consumption and etc.
CUT 50PD, CUT 70PD plasma cutting machines Characteristics:
◆ IGBT technology.
◆ With EMI filter to minimize the pollution of the electrified net.
±
◆ High mains voltage tolerance
15%to maintain stable work.
◆ MCU control system, responds immediately to any changes.
◆ Excellent cutting capability.
◆ Pilot arc controller, can cut grid workpiece.
◆ Intelligent protection: over-current, over-heat, when the mentioned problems occoured,
the alarm lamp on the front panel will be on and the output current will be cut off. It can
self-protect and prolong the using life.
2.2 Specifications
CUT 50PD
Description
Weight
6kg
Power source dimensions
375x152x291
Cooling
Fan cooled
Welder type
Inverter power source
European standards
EN 60974-1 / IEC 60974-1
Mains voltage
1 x 230 Volt ± 15%
Grid frequency
50/60Hz
Cutting rurrent range
20-50 A
Effective input current
26A
Maximum input current
33.9A
Generator requirement
12.8KVA
50A@ 60%100V
Duty cycle, 40°C, 10 min
39A@ 100%96V
Open circuit voltage
270V DC
Schutzgrad
IP23
Protection class
H
Quality cutting thickness (500mm/min)
8mm
Maximum cutting capacity
12mm
Summary
CUT 70PD
6.3kg
375x152x291
Fan cooled
Inverter power source
EN 60974-1 / IEC 60974-1
3 x 400 Volt ± 15%
50/60Hz
20-70A
10.6 A
13.8A
15KVA
70A@ 60%108V
46.5A@ 100%98.6V
311V DC
IP23
H
15mm
20mm
29
Publicidad
Solución de problemas
