Thermostat - Tefcold CPV1380E Manual De Instrucciones

THERMOSTAT

The thermostat is placed in the top panel.
Eliwell type:
The thermostat has been pre-set and in most cases it is not necessary to adjust the settings.
When turning on the cabinet the display will show the current temperature in the cabinet.
Display set temperature:
Press this key and the display will show the set temperature. Press the key again to
return to normal reading
Set new temperature:
Press this key and the display shows SET.
Press this key and the display shows the set temperature.
Press this key to increase the set temperature.
Press this key to lower the set temperature.
Press this key to save the new settings.
Press this key to return to normal reading.
Alarm codes:
'E1' Flashing in the display: indicates that the cabinet sensor is defective.
The cabinet will strive to keep the set temperature until it has been repaired.
6