Milwaukee 49-16-2734 Manual De Instrucciones

Cat. No. / No de cat.
49-16-2734
49-16-2735
TO REDUCE THE RISK
WARNING
O F I N J U RY, R E A D
A N D U N D E R S TA N D T H E S E I N-
STRUCTIONS, THE OPERATOR'S
MANUALS PACKAGED WITH YOUR
MOWER, AND ALL LABELS ON
YOUR MOWER, BATTERY PACKS,
AND CHARGER. Always unplug the
charger and remove the battery packs
from the charger or mower before
performing any maintenance. Never
disassemble the mower, battery pack
or charger. Contact a MILWAUKEE
service facility for ALL repairs.
1. Remove battery packs.
2. Turn the mower on its side.
Blade
Lame
Espada
IMPORTANT SAFETY INSTRUCTIONS
REMOVING/INSTALLING THE
CUTTING BLADE
ENLÈVEMENT / INSTALLATION
DE LA LAME DE COUPE
RETIRO / INSTALACIÓN DE LA
HOJA DE CORTE
Spindle
Broche
Huso
Blade Motor Fan
Spacer
Ventilateur de moteur à pales
Entretoise
Ventilador del motor de la cuchilla
Espaciador
Blade Nut
Écrou de lame
Tuerca de la cuchilla
3. Wedge a block of wood between the
blade and the mower deck to prevent
the blade from turning.
4. Remove the blade nut by turning it
counterclockwise (as viewed from bot-
tom of mower) using a 18 mm wrench
or socket.
5. Remove the blade nut, washer, shear
plate, blade, blade motor fan, and
spacer.
6. Install new blade. The circle and
triangle holes of the blade must align
onto the circle and triangle posts of
the blade motor fan. The shear plate
edges must wrap around the blade.
7. Tighten the blade nut to 313-347
in.lbs, using a torque wrench.
Shear Plate
Plaque de
cisaillement
Placa de corte
Square Washer
Rondelle carrée
Arandela cuadrada