on the upper chimney as shown in figure 2A.
Insert upper decorative flue inside the lower decorative flue and rest them on top of the
frame. Extract the upper flue up to the bracket and fix it with the screws B (Fig.3).
USE AND MAINTENANCE
• We recommend that the cooker hood is switched on before any food is cooked. We also
recommend that the appliance is left running for 15 minutes after the food is cooked, in
order to thoroughly eliminate all contaminated air. The effective performance of the cooker
hood depends on constant maintenance; the anti-grease filter require special attention.
• The anti-grease BAFFLE
filter: This is a suction system which offers improved perfor-
mance with respect to the classic aluminium filters. Its structure means it is able to retain
grease particles, thereby reducing noise to a minimum. It should be washed regularly
every 15 to 30 days in order to prevent the oil from leaking out; this may be done by hand
or using the dishwasher.
- After a few washes, colour alterations may occur. This does not give the right to claim
their replacement.
• Clean the hood frequently, both internally and externally, using a cloth dampened
with denatured alcohol or neutral liquid detergents that are non abrasive.
• The lighting system is designed for use during cooking and not for the prolonged general
lighting of the room. The prolonged use of the lighting system significantly decreases the
average duration of the bulbs.
• Attention: the non compliance with the hood cleaning warnings and with the replace-
ment and cleaning of the filters entails risk of fires. One therefore recommends keeping
to the suggested instructions.
• Replacing LED lamps (Fig.7)
The intervention of a specialised technician is necessary to replace them.
• Commands luminous (Fig.8) the key symbols are explained below:
A = LIGHT
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III
F = AUTOMATIC STOP TIMER - 15 minutes (*)
Your appliance has the INTENSIVE speed function, from speed THREE, press key E for 2
seconds and it will be activated for 10 minutes after which it will return to the previously
set speed. When the function is active the LED flashes. To interrupt it before the 10 minutes
have elapsed, press key E again.
• Function Clean air
By pressing key F for two seconds (with the hood switched off ) the "clean air" function is
activated. This function switches the appliance on for ten minutes every hour at the first
speed. As soon as this function is activated the motor starts up at the first speed for ten
- 11 -