4.
Mains power supply 5V/1A
5.
Microhphone input 6.35 mm
6.
Lighting button. Press briefly to switch between the different lighting modes.
•
RGB scrolling mode,
•
Single colour mode.
Press and hold to switch off the lighting.
7.
Input mode button. Switches between all the input modes available.
8.
Down button. Press the < button for the volume and return to the previous track via
Bluetooth, SD and USB – Press briefly to reduce the volume.
9.
Bouton lecture/pause. Press to play via Bluetooth, SD and USB. Press briefly to play
or pause.
10. Up button. Press the > to raise the volume and switch to the next track via Bluetooth, SD
and USB – Press briefly to raise the volume. Press and hold in SD/USB mode to switch
from one file to another.
11. EQ button. Press briefly to add an equaliser. Press again to cancel.
Charging
•
Connect the USB cable to the charging port on top of the speaker. During charging, the
LED indicator turns red. The charging LED light switches off when charging is complete.
•
Full charging can take up to 4 hours depending on the USB power source.
•
A beep will be heard a few minutes before the battery is discharged. Remember to plug
in your speaker to charge it.
Bluetooth connection
•
When the speaker is turned on, it automatically switches to Bluetooth search mode.
•
Search for "PARTYBTHPS" on your mobile device and select it. Once found, a beep will
sound to indicate that the speaker is connected to the device.
•
During pairing, the LED indicator flashes. Once the speaker is paired, it turns solid blue.
•
All connections are located at the rear. The playback mode will automatically default to
the connected device. Disconnect the USB-SD card or the auxiliary cable to return to
Bluetooth connection mode
Specifications
•
Output power: 1 X 10 W RMS
•
Power supply: 5V/1A
•
Loud-speaker: 1 x 3"
•
Battery capacity: 5 V 1800 mAh
•
Wireless transmission distance: 10 M
•
Product dimensions: 135 x 137 x 175mm
•
Bluetooth pairing name: PARTYBTHPS
Note: The maximum connection distance is approximately 10 metres. Place your Bluetooth
speaker as close as possible to the device to avoid the connection being disrupted.
Technical specifications
- EN 12 -