Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Adjusting the end stop of the cutting blade F
The end-stop of the cutting blade can be adjusted
on pruning shears so that the cutting device closes
properly, thereby ensuring the best possible cut.
The adjustment should be check by a specialist
workshop once a year.
If the cutting device no longer fully closes, the
end-stop can be adjusted using the adjustment
screw [A].
Only have this adjustment carried out by a specialist
workshop in order to avoid damage to the pruning
shears.
Transport and storage
Risk of injuries due to the cutting tool.
¾ Before transport or storage, switch off
the device and wait until the cutting tool
comes to a standstill.
¾ Remove the operating arm before
transporting or storing the device.
26
WARNING!
Transport
Secure the device sufficiently to prevent its unin-
Î
tentional slipping if you are transporting it on or in
a vehicle.
Storage
Perform cleaning and servicing work before
Î
storage.
Store the tool in a dry location out of the reach of
Î
children.
Store the operating arm and pruning shears sep-
Î
arately.
Store the operating arm in a cool and dry loca-
Î
tion. Recommended storage temperature ap-
prox. 0 - 23°C
Keep the device and especially its plastic com-
Î
ponents away from brake fluids, petrol, mineral
oil containing products, penetrating oils etc. They
contain chemical substances that can damage,
attack or destroy the plastic components of the
device.
Fertilizers and other garden chemicals contain
Î
substances that may have a highly corrosive effect
on the metal parts of the tool. Therefore do not
store your tool near to these substances.
Transport and storage
Publicidad
