us_main.book.book Page 24 Friday, August 19, 2022 2:09 PM
24 OPERATION
2
Selecting a power level turns on the cooking
zone. The cooking zone indicator remains lit
and the power level is stored.
Figure A
Figure B
a
b
NOTE
• If a power level is not selected, the power
settings will turn off after 3 seconds.
Readjusting the Power Level
1
Press the desired cooking zone in the display
to bring up the Power Levels popup.
A
B
2
2
Press the desired level in the Power Levels
popup. If no selection is made, the Power
Level popup disappears after 3 seconds and
the power level remains the same.
NOTE
• Once the power level is changed, the burner
operation is temporarily stopped and then
restarted at the changed power level.
Power Level Indicator
• Cooking element LED bar
- The range provides an LED bar for each
cooking element on the cooktop. Check the
display and use the LEDs to monitor the power
levels of the elements.
9 Step
a
Boost
b
Melt
c
1
2
3
4
5
6
7
8
9