Publicidad
KNOW HOW TO IDENTIFY THE SYMPTOMS OF HEAT STROKE:
Depending on the conditions in which the heated gilet is used, you may become a victim of heatstroke. These are the symptoms of heatstroke:
• Extreme perspiration, clammy skin, pale or reddened skin, general weakness,
dizziness, confusion, nausea, vomiting, headaches, cramps, fast and shallow breathing.
WARNING: to avoid the possibility of heat stroke, disconnect the gilet if you are wearing it in an environment with a considerably higher temperature
• Do not place any explosive items (gas lighter, matches, etc.) in the pocket intended
for the battery.
• Do not wear this gilet in a storm, rain or in a high pressure working environment.
• This gilet should not be worn by pregnant women, young children, physically
impaired people, anyone insensitive to heat, or anyone with poor circulation.
CHARGER / BACK UP BATTERY 6000 MAH/ 5V
SPECIFICATIONS:
TYPE OF BATTERY: LITHIUM POLYMER
INPUT: 5 V/2 A (MAX.)
CAPACITY: 6000 MAH/22.2 W
OUTPUT CAPACITY: 10 W (MAX.)
LOAD RESISTANCE: 3 Ω-200 Ω-
INSTRUCTIONS FOR USE - QUICK START
- To fully charge the device, use the Micro USB cable to charge the 6000 mAh/ 5V
battery for approximately 4-4.5 hours or 8-9 hours depending on the charging
method.
- To activate the LED torch, hold down the on button for 2 seconds. Hold it down
again for 2 seconds to turn off the LED torch.
- The LED power supply indicator lights indicate the lifetime and charge status of the
6000 mAh/ 5V battery.
LED POWER INDICATORS:
1 LED: 25% POWER
2 LEDs: 25-50% POWER
3 LEDs: 50-75% POWER
4 LEDs: 75-100% POWER
• If you notice any one of these symptoms, reduce the temperature of your body by
sitting or lying down in a cool place, drinking sufficient amounts of cool water,
using a fan and applying wet cloths to the skin to reduce the body's temperature.
• This gilet should not be worn by anyone suffering from a serious cardiovascular
disease or who has a pacemaker. In case of doubt, please contact your atten-
ding physician.
• Do not use this product if it has any defect.
Charger / Back up battery
Battery power LED indicator lights
On button
USB output port 5 V / 2 A
LED torch
USB micro input port 5 V / 2 A (max.)
USB output port 5 V / 1 A
- The USB output ports of the 6000 mAh/ 5V battery allow you to charge and power
more than one device at a time.
- To do so, switch on the 6000 mAh/ 5V battery and use the USB cable to connect and
charge your USB devices.
- To power your heated gilet, connect the 6000 mAh/ 5V battery to the USB cable in
the concealed pocket in your heated gilet. Press the temperature control button on
the gilet and hold it down for 3 to 5 seconds, until the LED indicator light on the
gilet turns red. Then use the heated gilet control button to select the desired heat
setting.
- While heating your heated gilet, use the other 5 V output port on the 6000 mAh/
5V battery to simultaneously charge another USB device!
8
CHARGE THE 6000 MAH/ 5V BATTERY
Use the micro USB cable supplied to plug the 6000 mAh/ 5V battery into a 5V/2A
USB mains adapter (not supplied) or the USB port of a computer and charge it.
Duration to fully charge: 4-4.5 hours (via the mains adapter) or 8-9 hours (via
the computer).
CHARGE OTHER DEVICES
Connect the large end of the USB cable to the USB port in the 6000 mAh/5V batte-
ry, then connect the micro USB end to your USB device. Switch on the 6000 mAh/
5V battery to charge your device.
CONNECT YOUR HEATED GILET TO A POWER SUPPLY
To power your heated gilet, connect the 6000 mAh/ 5V battery to the USB cable in
the concealed power pocket in your heated gilet. Press the temperature control
button of your heated gilet and hold it down for 3 to 5 seconds, until the LED indi-
cator light on the heated gilet turns RED. Then use the heated gilet control button
to select the desired heat setting.
DOUBLE USE OF THE 6000 MAH / 5 V BATTERY
The USB output ports of the 6000 mAh/ 5V battery allow you to charge and power
more than one device at a time. This means that you can simultaneously power
your heated gilet while also charging your telephone for optimum convenience.
USB micro cable
USB mains adapter
OR
USB port
LED temperature settings of the button on the front of the heated gilet:
Grey = off
Red = 100% heat
White = 70% heat
Blue = 40% heat
9
Publicidad
