Panasonic BL-PA300KTA Guía Rápida

Getting Started
PLC Adaptor Starter Pack
Power Line Communication
BL-PA300KTA
Model No.
Set of 2 Adaptors (Master and Terminal)
Included items
MASTER TERMINAL
MASTER TERMINAL
PLC Adaptor × 2
One adaptor is pre-configured as the "master" adaptor,
and the other is pre-configured as the "terminal" adaptor.
Example of an integrated HD-PLC network
Wall outlet Network camera
Terminal
Hub
Wall outlet
Master
Router
Modem
INTERNET
Installation
Placing the adaptors
1
Connect the adaptor to a wall outlet in the room where you plan to use it.
Confirm that the PLC indicator of each adaptor lights in green when you plug
2
the adaptors into the wall outlets.
• If the indicators are not lit as shown below, confirm all connections and refer to the
troubleshooting section of the Operating Instructions.
PLC LAN MASTER
(green) (orange) (green)
MASTER TERMINAL
MASTER
Connecting adaptors to network devices
Connect a LAN cable to each adaptor's LAN jack.
3
The LAN indicator of each adaptor turns green.
4 Connect the other end of each LAN cable to a network device.
• If the indicators are not lit as shown below, confirm all connections and refer to the
troubleshooting section of the Operating Instructions.
PLC LAN MASTER
(green) (green) (green)
connect to a
router or modem
MASTER
PNQX1294ZA
KK0508MJ0
All manuals and user guides at all-guides.com
LAN Cable × 2
Order No.: PQJA10138Z
Connects each adaptor
to a network device.
Network printer
PC
Additional
adaptors can
be added
later, for a total
Wall outlet
of 16 adaptors
Terminal including the
(PLC Adaptor master. See
the Operating
Add-on Unit)
Instructions for
PC
details.
PLC LAN MASTER
(green) (orange) (off)
MASTER TERMINAL
TERMINAL
PLC LAN MASTER
(green) (green) (off)
connect to a
network device
TERMINAL
This document is written to be used with the BL-PA300KTA, which is a pre-configured set
of 2 adaptors.
No settings are required to use these adaptors. Simply follow the instructions provided in
this document. Refer to the included Operating Instructions for safety, reconfiguration,
and troubleshooting information.
For best results
Avoid connecting high power-consuming appliances to the same wall outlet. Additionally,
connecting an adaptor to a uninterruptable power supply (UPS) or backup power supply
device is not recommended.
While connecting the adaptors to a wall outlet is recommended, keep the following in mind
if you must connect an adaptor to a power strip:
- Make sure the power strip does not a have a noise filter or a surge protector, as these
features may interfere with the performance of your adaptors.
- Do not connect the adaptor to a power strip that receives power from another power
strip.
- Use a power strip with an AC cord that is as short as possible.
For more information, refer to the included Operating Instructions.
For Best Performance
■ We recommend plugging the adaptor directly into a wall outlet whenever possible.
■ AC adaptors and battery chargers (such as cell phone chargers) may interfere with
the performance of this product. We recommend connecting such devices to a power
strip which has a noise filter.
■ You can test the speed of each terminal's network connection. Refer to the included
Operating Instructions for details.
Recommended
Outlet
Not Recommended
Outlet
Outlet
AC adaptor
or charger
Outlet
AC adaptor Charger
Noise filter power strip
AC adaptor
or charger
or
Noise filter power strip