Sauder 426908 Instrucciones De Montaje página 22

Step 16
1
D550
Groove
å
Insert the DRAWER SIDES (D550 and D551) at an
angle into the slot at each end of the SMALL
DRAWER FRONT (K).
3
M67
1
M67
Surface with
HIDDEN CAM
å
Push one HIDDEN CAM (1F) into the DRAWER
BRACE (M67). Then, insert the metal end of a
CAM DOWEL (2F) into the HIDDEN CAM.
å
Fasten the DRAWER BRACE (M67) to the SMALL
DRAWER FRONT (K). Tighten one HIDDEN CAM.
Page 22
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D551
K
Arrow
Metal end
1F
2F
Hidden part using
recycled material.
Color may vary.
K
2
D550
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D985) into the grooves
in the DRAWER SIDES (D550 and D551) and SMALL
DRAWER FRONT (K).
4
D550
M67
å
Fasten the DRAWER BACK (D552) to the DRAWER
SIDES (D550 and D551) and DRAWER BRACE (M67).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the LARGE DRAWER FRONT (H).
426908
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n fi
n i s h
s u r
e d
f a c
e
D985
K
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
D552
D551
www.sauder.com/service
9
D551
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.