Manuales relacionados para Truper Expert HILA-2000X
Resumen de contenidos para Truper Expert HILA-2000X
- Página 1 Manual Electric Pressure Washer 2 000 PSI Applies for: Code Model 102111 HILA-2000X HILA-2000X Read this manual thoroughly CAUTION before using the tool.
-
Página 2: Tabla De Contenido
Contents CAUTION Technical data Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tool Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety Warnings for Power Washers of fatal injuries please read and understand this Manual before Parts using the tool. -
Página 3: Technical Data
Technical data HILA-2000X Code 102111 Description Electric Pressure Washer Maximum Pressure 2 000 PSI Maximum Inlet Pressure 174 PSI Minimum Inlet Pressure 43.5 PSI Maximum Inlet Temperature 122 °F Maximum Water Flow 1.5 gpm Input flow 3.3 gpm Voltage Frequency... -
Página 4: General Power Tool Safety Warnings
General Power Tools Safety Warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Página 5: Safety Warnings For Power Washers
Safety Warnings for Power Washers Before Operating the Washer When Operating the Washer • Bear in mind that pressure spraying is • Unroll the pressure hose all the way to CAUTION CAUTION very powerful and can be very dangerous if misused. It is prevent overheating. -
Página 6: Parts
Parts Handle Hose reel Quick coupling for high-pressure hoses Hose reel handle High pressure gun holder Power cord Accessories holder holder Switch Power cord Foam regulator Water connection Transport wheels Lance tip support Locking button for high-pressure gun Hose reel 0°, 15°, 25°, and 40°... -
Página 7: Assembly
Assembly High pressure hose Water supply hose • The high-pressure hose is already assembled to the reel • Before connecting the garden hose (E) CAUTION at the factory, the following instructions are for to the equipment, let the water run through it to expel replacement in case of damage: any objects inside. - Página 8 Assembly WARNING • Before mounting or removing a nozzle on the metal lance, turn off the pressure washer, shut off the water supply, depress the trigger to release pressure, and engage the safety latch to lock the trigger. Failure to comply with any of these points could result in serious injury.
-
Página 9: Start Up
Start Up Turning On 1. Open the water faucet and keep it open all the time you are using the washer. Maximum inlet pressure: 174 PSI 2. Connect the plug into the power supply. 3. Tighten and hold the high-pressure gun trigger to release the air caught inside the washer. Release the trigger when the water flow is constant. -
Página 10: Maintenance
Maintenance WARNING • Disconnect the power cord from the Washer Lubrication power supply before carrying out any type of adjustment, service or maintenance on the washer. • Every six months, take the machine to a Authorized Service Center to carry Cleaning and Care out maintenance (lubricate valves and oil change). -
Página 11: Troubleshooting
Troubleshooting Problem Possible cause Solution The washer does not • The washer is not connected. • Connect the washer. start. • Faulty power outlet. • Use a different power outlet. • Blown fuse. • Replace fuse. Shut off other machines. •... -
Página 12: Notes
Notes ENGLISH... -
Página 13: Authorized Service Centers
Authorized Service Centers In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS AGUASCALIENTES... -
Página 14: Warranty Policy
Model Brand 102111 HILA-2000X This product is guaranteed for 1 year. To make the warranty valid or purchase parts and components you must present the product in Corregidora 22, Col. Centro, Alc. Cuauhtémoc, CDMX C.P. 06060 or at the establishment where you purchased it, or at any Truper Service Center listed in the annex to the warranty ®...