Refrigerator Door Lock
Lock Fixing Block
Refrigerator Door
Lock Cover (left)
Fig. 7
5. Reverse the Metal Bracket and Plastic Bushing on the
bottom of Refrigerator Door. (Fig. 8)
NOTE: The Metal Bracket is only applicable to models
FCR08DCGTA-BL/BR and FCR10DCGTA-BL/BR.
Fig. 8
6. Unscrew the Door Latch Bracket fixing screws and
change it to the opposite side. (Fig. 9)
Fig. 9
CCD-0005506 Rev: 03-24-22
Refrigerator Door
Lock Cover (right)
Metal Bracket
Plastic Bushing
7. Fix the Hinge A at the bottom left. Reinstall the
Refrigerator Door and fix the Hinge B to the left side of the
middle beam. (Fig. 10)
Hinge B
Hinge A
Fig. 10
8. Install the Freezer Door and then fix the Hinge C at the top
left. (Fig. 11)
Fig. 11
Door swing change is complete, now check for proper
alignment. Feel for any binding, or misalignment of the
door, and make certain the latch is catching and releasing
correctly. Slight adjustments can be made by loosening and
adjusting the hinges if needed.
NOTE: The instructions above are for changing the door
open direction from the left to the right. By reversing the
above steps, you can change the door open direction from
right to left.
- 7 -
Hinge C
Hinge B