Abask Q40S Manual Del Usuario página 8

Picture Taking
File Playback
USB Connection
Loop Recording
G-sensor
Lock Function
Parking Guard
In the video standby mode, press mode button
[M]to enter photo mode, press[OK/ ] button
to take pictures and save.
Press mode button[M]twice in video standby
mode to play back files. Press page up and
down buttons to select the files, press
[OK/ ] button to play the file, press page
up and down buttons to fast forward/backward.
There are three options when USB data cable
plugs in the computer:1.Storage: Press [OK/ ]
button to enter the USB disk reading , you can
play, copy, and delete the files or do other
operations on the computer.2.PC Camera：
It can be an Internet camera.Recording mode:
Supply power to the dash camera and make
it record normally.
This product can do loop recording. Looping
mode can be set in the video menu. For example,
if looping time is set for 3 minutes, the recorder
will automatically save a section of videos every
3 minutes. When the memory card gets full,
the newly recorded files will overwrite the old
files that are not locked.
When the vehicle is impacted by the external
forces, G-sensor will work. The dash cam will
automatically lock and save the current shooting
video file and protect it from being covered by
the loop recording. The top left corner of the
screen will display an icon of a lock. The level
of its sensitivity can be chosen on the menu setting.
In the normal status of the recording, press
mode button[M]to lock and save the current
file without having it covered, an icon of a lock
will display on the top left corner of the screen.
In the status of the parking monitor, if the
dash cam detects impact forces, it will
automatically start recording and lock the
file in case of being covered.
6