Descargar Imprimir esta página

Electrical Safety; Safety In The Workplace; Personal Safety - UNIPRODO UNI HUMIDIFIER 04 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
DE
ENTSORGUNG GEBRAUCHTER GERÄTE
Dieses Produkt darf nicht über den normalen
Hausmüll entsorgt werden. Geben Sie das Gerät bei
entsprechenden Sammel- und Recyclinghöfen für
Elektro- und Elektronikgeräte ab. Überprüfen Sie das
Symbol auf dem Produkt, der Bedienungsanleitung und
der Verpackung. Die bei der Konstruktion des Gerätes
verwendeten Kunststoffe können entsprechend ihrer
Kennzeichnung recycelt werden. Mit der Entscheidung
für das Recycling leisten Sie einen wesentlichen Beitrag
zum Schutz unserer Umwelt. Wenden Sie sich an die
örtlichen Behörden, um Informationen über Ihre lokale
Recyclinganlagen zu erhalten..
PROBLEMLÖSUNGEN
Problem
Mögliche Ursache
Handlung/Lösung
Schließen Sie den
Der Stecker
Stecker an die
wurde nicht
Das Gerät
Stromversorgung
angeschlossen.
funktioniert
an.
nicht
Unzureichendes
Füllen Sie den
Wasser im Tank.
Wassertank.
Unzureichendes
Füllen Sie den
Wasser im Tank.
Wassertank.
Das Gerät
erzeugt
Verschmutzter
Reinigen Sie den
keinen Nebel
Nebelsensor.
Sensor.
oder die
Nebelstruktur
Setzen Sie den
Wassertankdeckel
ist falsch
Wassertankdeckel
ist verschoben.
richtig auf.
6
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Parameter value
Product name
HUMIDIFIER
Model
UNI_DEHUMIDIFIER_04
Rated voltage [V~]/
230/50
Frequency [Hz]
Rated power [W]
21
Dimensions (Width
318x150x283
x Depth x Height) [mm]
Weight [kg]
2,1
Water tank capacity [ml]
4400
Operation range [m
]
≤40
2
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation. (general
warning sign)
ATTENTION! Electric shock warning!
Class II protection device with double
insulation.
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
7
EN
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to HUMIDIFIER.

2.1. ELECTRICAL SAFETY

a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Use the cable only for its designated use. Never
use it to carry the device or to pull the plug out of
a socket. Keep the cable away from heat sources,
oil, sharp edges or moving parts. Damaged or
tangled cables increase the risk of electric shock.
d)
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
e)
Do not use the device if the power cord is
damaged or shows obvious signs of wear. A
damaged power cord should be replaced by a
qualified electrician or the manufacturer's service
centre.
f)
To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not
use the device on wet surfaces.
g)
ATTENTION! DANGER TO LIFE! While cleaning,
never immerse the device in water or other
liquids.

2.2. SAFETY IN THE WORKPLACE

a)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
b)
Only the manufacturer's service point may
repair the device. Do not attempt any repairs
independently!
c)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on
2
live electrical devices) to put it out.
d)
Please keep this manual available for future
reference. If this device is passed on to a third
party, the manual must be passed on with it.
e)
Keep packaging elements and small assembly
parts in a place not available to children.
f)
Keep the device away from children and animals.
g)
If this device is used together with another
equipment, the remaining instructions for use
shall also be followed.

2.3. PERSONAL SAFETY

a)
The device is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or they have received instruction on how to
operate the device.
b)
To prevent the device from accidentally switching
on, make sure the switch is on the OFF position
before connecting to a power source.

Publicidad

loading