Assembly; Setup And Operation - oneConcept Blitzeis Manual De Instrucciones

ASSEMBLY

1. Put the base and stand together and secure both parts by tightening the three
screws with the screwdriver.
2. Push the mains cable through the hole in the middle of the base after
connecting the mains cable to the end piece (the plastic piece with the cable
duct).
3. Place the fan on the base and fix it by tightening the 3 long screws with the
screwdriver.
Remote control
1. Insert a button cell battery (not included) into the remote control.
2. Press the ON/OFF button to start the device. The functions of the remote
control are identical to the functions of the buttons on the control panel.

SETUP AND OPERATION

You can operate the fan either via the remote control or the following buttons on
the control panel:
EN
17