Publicidad
Tools Required For Kit Installation:
Safety Goggles
Ear Protection
Dust Mask
Gloves
Shovels (Digging & Flat)
Metal Cutters (For banding on cubes)
Mason Hammer (Chipping & Hammer)
Road Stone Rake
Tamper (Hand or Mechanical)
Wheelbarrow
Level (2' and 6' recommended)
Speed Square
Caulk Gun 10 oz or 28 oz (depends on what size
adhesive is purchased)
Rubber Mallet
14" Demo saw with diamond blade
Tape Measure
Marking Device (pencil, soap stone, etc)
Chalk Line
Hand Broom
Concrete Tools (Trowel/Floats)
Drill & 1/16" bit
5/16" Nut Driver
7 ¼" Circular saw with wood blade
4" Electric grinder
4" Diamond cup grinder
4 Carpenters clamps
Items Included in the Grill Module Kit:
1 - Reinforced concrete lintel 40" x 4" x 8"
3 - Plastic shim packs for leveling lintels or
block as needed
1 - Pallet of Maytrx Wall
1 - Pallet of Maytrx Wall cut pieces
1 - Set of Appliances
1 - Granite Countertop
1 - Installation manual
Cambridge Pre-Packaged / Pre-Cut
MaytRx Grill Module
Material Required:
¾" clean stone (approx. 1/2 ton)
Concrete (approx. 13-80 lb bags)
Cambridge concrete adhesive (approx. 3-29 oz.
or 8-10.3 oz. tubes)
(4 pcs) 2" x 4" x 8' lumber
2 ½" wood screws
½" rebar (approx. 20')
Silicone for granite
2
2011
Publicidad
