Publicidad
TEMPERATURE ADJUSTMENT:
Follow the ironing instructions on the garment label.
If there is no instruction, but you know the type of fabric, please refer to the following table.
Note: If the fabric is made up of different types of fabrics, select the temperature required by the
most delicate fabrics.
MATERIAL
TEMPERATURE
Synthetic
Silk, Wool
Cotton, linen
IRONING WITH VERTICAL STEAM
1. You can iron in vertical position (hanging curtains) on ironing board, clothes hanging on hangers,
etc.
2. Fill the iron with water
3. Plug the iron into the mains and turn it on.
Use the wheel to select the setting temperature in the MAX position.
The hotter the iron is, the more steam is generated.
When the light stops flashing the iron is at the correct temperature and ready for use.
During the use of the MAX position the light will flash periodically indicating that the iron
maintains the selection temperature.
Keep your iron at a distance of 15 cm (6 inches) from the sole to the fabric.
Press the steam injection button, steam will penetrate the fabric eliminating wrinkles.
To apply more steam press the steam injection button.
Wait several seconds between pressing and pressing.
SPRAY
The spray function will only work if the water tank is full
The sprayed water is used to work with thick fabrics or difficult areas (pockets collars, sleeves,
folds, etc.) It can also be used to iron delicate fabrics that can not be steam ironed.
Just press the button to produce a jet of water. If the spray is used very often the iron can be
stopped for some time, it is necessary to press the spray button a few times before restarting
ironing correctly
TEMPERATURE CONTROL
Low Temperature
Average temperature
MAX High temperature
Publicidad
