Audizio BRESCIA Manual De Instrucciones página 8

All the settings parameters for radio are available on the System settings menu.
Equaliser
Several predefined EQ settings are available, including a custom, user-defined setting. To choose an EQ setting, select Menu >
System settings > Equaliser. You can then choose from a variety of predefined settings and My EQ. The last option 'My EQ
profile setup' allows you to define your own settings for the 'My EQ' option, with custom bass and treble settings.
Network
Network wizard
This guides you through the necessary steps to join a network. This is also automatically run as part of the Setup
wizard. The screens and options presented will depend on the type of network and network protection used.
Selecting a network
When the Network wizard is chosen, the device automatically scans for available wireless networks and presents a
list of SSID's (Service Set Identifier) for the networks. The device remembers login details for the last four wireless
networks it has connected to and will automatically connect to them when they are available. If connection to a
network is temporarily lost, the device will automatically reconnect.
Open network
If the network is open (non-encrypted), the device connects, and no further input is required.
Standard encrypted network
If the wireless network is protected the next screen presents options to enter the network key or
password/phrase.
On completion
The device connects to the selected network. If connecting fails, the device returns to a previous screen to
try again. To exit the process, use the [BACK/MENU] button. If the network connection is lost, the device
reconnects automatically.
PBC Wlan setup (Wi-Fi Protected Setup)
The device prompts you to press the connect button on the router and then press the select control. For more
information on setting up a PBC Wlan encrypted network, please refer to your PBC Wlan router's instructions.
View settings
Displays the settings details for the current network setup, including:
Active connections
MAC address
Wlan region
DHCP
SSID
IP Address
Subnet mask
Gateway address
Primary DNS
Secondary DNS
Manual settings
Choose to enable/disable DHCP.
NetRemote PIN setup
Allows you to setup a PIN number to be entered before being able to connect to the device remotely over a network.
Network profile
This displays a list of the networks remembered by radio (up to a maximum of 4). You can see the list of registered
networks through Menu > System settings > Network > Network profile>. Here, you can delete unwanted networks
by selecting them and pressing [OK], confirm deleting by selecting Yes.
Clear network settings
This option allows for clearing current network settings, allowing you to join an alternative network more easily.
Keep network connected
Choose to keep network connected or not.
Time/Date
Set Time/Date
The date and time are displayed as dd-mm-yyyy with the first value (dd) flashing. Adjust each value with the
navigation knob. As each value is set, press the navigation knob to confirm the value. The next value will flash, ready
for adjustment.
8