Descargar Imprimir esta página

Start And Programmes; Choosing A Programme - Ariston AS600V Folleto De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Start and Programmes

Choosing a programme

GB
1. Plug the dryer into the electrical socket.
2. Sort your laundry according to fabric type (see
Laundry).
3. Open the door and make sure the filter is clean
and in place (see Maintenance).
4. Load the machine and make sure items are not
in the way of the door seal. Close the door.
5. Choose the drying programme by checking the
Programmes table (see Programmes) as well as
the indications for each type of fabric (see
Laundry).
- Set the temperature with the HEAT button.
- Select a programme or drying time by rotating
the PROGRAMMES knob clockwise.
6. Set a delay time by using the TIMER knob if
necessary.
6
7. If you wish to eliminate the buzzer sound, press
the ALARM button.
8. Press the START button to begin. The DRYING
indicator light will turn on and will stay on, even
during the delay. The indicator light will remain
on until you open the dryer door.
During the drying programme, you can check on
your laundry and take out items that are dry
while others continue drying. When you close
the door again, press the START button in order
to resume drying.
9. About 10 minutes before the programme is
completed, it enters the final COOL TUMBLE
phase (fabrics are cooled), which should always
be allowed to complete.
10. The buzzer will warn you when drying is
complete. Open the door, take the laundry out,
clean the filter and replace it (see Maintenance).
11. Unplug the dryer.

Publicidad

loading