Reading The Display During Treated Water Flow - eSpring 100188 Manual Del Propietário

EL E C T R O N I C S D IS PLAY
The Electronics display on the eSpring
usage (gallons/litres) and when the Cartridge was installed. When properly plugged into
an electrical outlet, the Water Purifier will display its status via the Electronic Module
LED display.
R EA DI NG T H E D I S PL AY D U R I N G TRE ATE D WATE R FL O W
STATUS
Normal display
Top Shroud removed
(Reseat for display)
Cartridge not recognized
Lamp malfunction
Under 10% Cartridge life
remaining
End of Cartridge life
Water Purifier
needs servicing
Water Purifier
malfunction
Blank display
Not blue,
No rolling water drops
not moving
6
WATER CUP CARTRIDGE
DROPS ICON ICON
Blue Blue Blue
Blue Red* Blue
Blue Red* Off
Blue Red* Blue
Blue Blue Blue
Blue Red* Flashing
Blue Red* Off
Flashing/
Flashing Flashing
Red*
Off Off Off
Off Blue
Water Purifier keeps track of actual water
®
LIFE
BEEPER PHONE
INDICATOR
Blue Off Off
Blue Repeated Off
Off Repeated Off
Blue Repeated Red*
Last
Once at
segment Off
flow start
flashing
Every 2
Off Off
seconds
Off Repeated Red*
Constant Flashing/
Flashing
tone Red*
Off Off Off
Blue Off Off
COMMENTS/ACTIONS
Normal
Cup icon On/Red –
Do not operate, replace Top Shroud
Install Cartridge – Light On/Red
Cup icon On/Red
Phone icon On/Red;
Need replacement Cartridge
Order replacement Cartridge
Install Cartridge – Light On/Red
Cup icon; Phone icon
Need new Electronic Module
Call Customer Service
Phone icon On/Red. All other segments flashing
Unplug immediately. Wait 5 minutes. Plug back in and run
treated water. If unsuccessful, call Customer Service.
Plug in unit or wait for power to return.
No UV treatment - Normal display does not
change when treated water flows. Sensor
malfunction. Call Customer Service.