Mounting The Antenna - nedis ANOR5002BK700 Manual De Instrucciones

ANOR5002BK700_MAN_COMP_print_1022.indd 7 ANOR5002BK700_MAN_COMP_print_1022.indd 7
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician
for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Do not throw away this product with other household
waste.
• There are no user serviceable parts. Do not open the
housing.
• Keep the product out of reach from children, infirm persons
or animals.
• Check the product regularly for signs of damage, when
damaged do not use the product any longer and return the
product to the supplier.
• Keep the product away from heat sources. Do not place the
product on hot surfaces or near open flames.
• Do not place the product under any mechanical stress.
• Do not expose the product to a high level of vibrations.
Operation instruction
For the best reception, please check the following conditions:
• Keep the antenna away from the sources of interference:
keep the antenna away from those big power consumption
devices, such as air conditioner, elevator, hair dryer and
microwave oven.
• Place the antenna near windows when using the antenna in
indoor environment.
• Install the antenna as high as possible: In digital terrestrial
reception, interceptions between antenna and transmission
tower will cause signal loss temporarily. Please install the
antenna as high as possible to reduce interceptions.

Mounting the antenna

1. This antenna can be used both indoor and outdoor, with the
included mounting accessories, it can be mounted on the
wall or the pole.
• Use the pole mounting accessories to fix the antenna on the
pole (image B).
• Use the wall mounting accessories to fix the antenna to the
wall (image C).
2. Connect the ''F'' male connector of the coaxial cable to the
''F'' female connector of the antenna, and wear the water-
proof cap to the end of the connected ''F'' connector (image
D).
7
10-10-2022 08:41:34 10-10-2022 08:41:34