Descargar Imprimir esta página

Changing The Battery; Changing Fuses - 3B SCIENTIFIC PHYSICS Escola 100 Manual De Instrucciones

Ocultar thumbs Ver también para Escola 100:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
12. Battery and fuses
The battery and the two fuses are located under-
neath the back cover of the meter.
One fuse each is provided for the 3 A and 10 A
sockets:
FF10 A/600 V, breaking capacity: at least 10 kA
(3B order number: 5008564)
The polarity is indicated by plus and minus signs
inside the fuse holder compartment. A mechanical
system ensures the battery makes no contact if it
is inserted the wrong way round.
12.1 Battery testing:
Batteries which are discharged and have not been
used for a while may leak.
Check the amount of charge left in
the battery from time to time.
Flat or leaking batteries should be
removed from the meter.
If the Escola 100 goes unused for a
long period:
Remove the Escola 100's battery
before reusing.

12.2 Changing the battery:

Before opening the casing:
Turn off the Escola 100.
Disconnect all measuring leads.
Unscrew the back of the casing.
Replace flat batteries with 1.5-V alkaline bat-
teries of size AA IEC LR6.
Place the negative pole of the battery on the
spring.
Close the casing again.

12.3 Changing fuses:

Before opening the casing:
Turn off the Escola 100.
Disconnect all measuring leads.
Unscrew the back of the casing.
Check the fuses.
Blown fuses should be replaced with ones of
the same rating.
Close the casing again.
3B Scientific GmbH ▪ Ludwig-Erhard-Str. 20 ▪ 20459 Hamburg ▪ Germany ▪ www.3bscientific.com
For cleaning, use a soft cloth, slightly mois-
tened with alcohol, or a brush.
Electrostatic charging of the display window can
affect the measurements under certain circum-
stances:
To remove such charge, use a soft cloth
slightly soaked in alcohol or a paint brush.
Dirt or moisture in the measurement sockets can
affect readings.
Shake out any dirt that may be in the meas-
urement sockets.
Soak a new swab with isopropyl alcohol and
work around the inside of each measurement
socket.
The packaging should be disposed of at local
recycling points.
Should you need to dis-
pose of the equipment
itself, never throw it
away in normal domes-
tic waste. If being used
in private households it
can be disposed of at
the local public waste
disposal authority.
Comply with the applicable regulations for the
disposal of electrical equipment.
Do not dispose of the batteries in the regular
household garbage. Follow the applicable le-
gal regulations (UK: Waste Batteries and Ac-
cumulators Regulations, EU: 2006/66/EC).
Subject to technical amendments
© Copyright 2022 3B Scientific GmbH
13. Cleaning
14. Disposal

Publicidad

loading

Este manual también es adecuado para:

1013527