Input Selection And Av Connections - Input And Output Sockets For Connected Equipment - Toshiba 42WH46 Serie Manual Del Usuario

Input selection and AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6
for a clear view of the back connection recommendations.
Most VCRs and decoders send a signal through the SCART
lead to switch the television to the correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
An S in the display e.g. 3S (EXT 3S), indicates the
B
input is set for an S-Video signal.
Input selection
Use the Input Selection if the television does not switch
over automatically.
Press B to select B
1
(EXT 1-4).
To return to television mode press
2
one of the numbered buttons.
INPUT signal selection
This specifies the type of signal going into SCART 3 (EXT3)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press Q until
1
AV connection is highlighted, then press R .
With S or R select either AV or S-VIDEO as the
required input for EXT3.
If the colour is missing try the alternative setting.
AV connection
EXT3 input
EXT3 output
Woofer
Audio output
EXIT : To exit
B
1, 2, 3, or 4
B B B
again or
B
AV
EXT1
Int.
Fixed
OUTPUT signal selection for SCART 3
This enables selection of the source to output from
SCART 3. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
SCART 1 and stereo VCR to SCART 3, then select EXT 1
as the EXT3 output. The signal received through
SCART 1 will output directly through SCART 3.
Select AV connection.
1
AV connection
EXT3 input
EXT3 output
Woofer
Audio output
EXIT
Use S or R to change the EXT3 output option to:
2
Monitor = The picture on screen.
TV = The last television programme selection.
EXT1 = The picture from equipment connected to
SCART 1.
EXT2 = The picture from equipment connected to
SCART 2.
EXT4 = The picture from equipment connected to
the front/side input sockets.
17 17
EXT1
Fixed
: To exit
AV
Int.