Publicidad
Idiomas disponibles
Idiomas disponibles
G-ST 6000+G2
Resetting the system to factory settings
Recovery DVDs are provided with your device. This allows for the recovery of the software in-
stalled at delivery as well as the original settings.
Please note that the recovery process should only be carried out by qualified personnel, as all
data on the C:\ drive will be overwritten!
Back up your settings on an external disk beforehand.
The recovery image is assigned to the origin hardware (CPU, Windows licenses) of your
G-ST. Subsequent modifications of the original hardware (such as CPU) are incompatible.
If you cannot access the Windows desktop or programs due to system problems, you can still
start the recovery process.
To restore the device to factory settings, for example after a crash, please proceed as fol-
lows:
1. Connect the DVD drive to a USB socket in the machine according to the instructions
provided by the manufacturer.
2. Switch on the device and place the recovery DVD into the DVD-ROM drive.
3. Now boot your G-ST from the recovery DVD. Start the PC, press a key
(F11, F12...) for opening the Bios boot menus, and then select the appropriate boot
device.
4. At the Windows RE Tools menus, select a keyboard layout, for example, US.
5. In the next menu click on the menu button "Troubleshoot"
27
Back to the
table of contents
Publicidad
