Publicidad
Idiomas disponibles
Idiomas disponibles
3B SCIENTIFIC
Plug-In Power Supply 12 V AC, 0.75 A
1001014 (230 V, 50/60 Hz)
1009545 (115 V, 50/60 Hz)
Instruction sheet
08/22 HJB
A Plug-in power supply 12 V AC, 750 mA for 230 V mains voltage 1001014
B Plug-in power supply 12 V AC, 500 mA for 115 V mains voltage 1009545
The plug-in power supply 12 V AC conforms to all
safety regulations for electrical measuring, control,
monitoring and laboratory equipment, as specified
under DIN EN 61010, Section 1, and the equip-
ment has been designed to meet protection class II.
It is intended for operation in a dry environment,
suitable for the operation of electrical equipment
and systems.
Safe operation of the equipment is guaranteed,
provided it is used correctly. However, there is no
guarantee of safety if the equipment is used in an
improper or careless manner.
If it may be assumed for any reason that non-haz-
ardous operation will not be possible (e.g. visible
damage), the equipment should be switched off im-
mediately and secured against any unintended use.
PHYSICS
®
1. Safety instructions
In schools and other educational institutions, the
operation of the plug-in power supply must be su-
pervised by qualified personnel.
1
Before using the plug-in power supply for the
first time, confirm that the specifications
printed on the housing are compatible with
the local mains voltage.
Before using the plug-in power supply, check
it for any damage. In the event of any mal-
function/operational defect or visible dam-
age, switch off the unit immediately and se-
cure it against unintended use.
Publicidad
