Publicidad
Idiomas disponibles
Idiomas disponibles
WK403040
To avoid wasting paint, use small amounts
►
of the product for viscosity testing, and use the
viscometer once you have obtained the correct
degree of viscosity for the paint.
Remember that some paints may contain
►
solid particles, and will have to be filtered before
filling the cup with paint to prevent damaging
the HVLP turbine paint spray gun.
Adjustment of the hose.
Insert the hose with pressure into the connec-
►
tors (fig.3, fig.4).
The connectors can be positioned as desired.
►
Tank filling and assembly.
Unscrew the tank of the HVLP turbine paint
►
spray gun.
Align the suction tube so that the gun can ab-
►
sorb all the liquid.
When the spray gun works horizontally, place
►
the suction tube forward (fig.5).
If you need to use the spray gun pointing
►
upwards, the suction tube should be placed po-
inting backwards (fig.6).
Place the tank on a paper.
►
Then, load the paint and thread the tank to
►
the gun adjusting it well.
Place the gun in the housing of the HVLP tur-
►
bine paint spray gun (fig.7).
WARNING! put the HVLP turbine paint spray
gun only on clean, firm and leveled surfaces.
Otherwise, it could aspire dirt or dust.
►
Operation.
Take the gun and point it to the object to be
►
painted.
Start the engine by operating the switch.
►
Adjust the deflector nozzle acording the job
►
to do.
You can choose between three types of spray
►
patterns, depending on the application and ob-
ject type (fig.8).
All manuals and user guides at all-guides.com
►
►
►
(fig.8-B).
►
ces dificult to reach (fig.8-C).
you are adjusting in the deflectors.
►
tion during adjustment.
►
►
selector to the vertical direction 90° clockwise.
►
turning the selector 90º in the opposite cloc-
kwise direction.
►
Adjusting the volume of sprayed material.
►
is in the rear of the trigger sprayer (fig.9).
►
the sprayed material.
►
the sprayed material.
Spray technique.
►
cleanliness and smoothness of the paint surface.
►
pared and kept free of dust.
►
as well as the threads or others that require to
be kept clean.
►
or similar surface to find the right fit.
►
painted and continue spraying till outside of it
without interruption during the pass.
►
distance, between 2,5 and 30 cm (fig.10).
English
Select the pattern type
Vertical oval to paint vertical surfaces (fig.8-A).
Horizontal oval to paint horizontal surfaces
Circular pattern for corners, edges and pla-
WARNING! never pull the trigger while
You can only turn the selector into one direc-
Do not force as you could damage the system.
Change the horizontal pattern by turning the
Change from vertical to horizontal pattern by
Changes can only be made in one direction.
Adjust the volume by turning the selector which
Turning clockwise increases the volume of
Turning to the left decreases the volume of
The final result of the spraying depends on the
Therefore, the surface must be carefully pre-
Cover all surfaces that should not be sprayed
It is recommended to test spray on cardboard
Start spraying outside of the surface to be
Advance in parallel while maintaining the same
13
Publicidad
