Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Cleaning
Always unplug the appliance from the wall outlet and allow it to cool completely
before cleaning. Never immerse the unit in water or splash it with water. Clean
the heater with a soft and damp cloth. For glass models, a soft cloth and glass
cleaner should be used. Never use a wet cloth, and dry the heater with a dry cloth
after cleaning. Do not use abrasive cleaners, solvents or scouring pads as this may
cause scratches or other irreparable damage. The heater must be completely dry
before it is put back into operation.
Use / Operation
Note that the heater may become discoloured during use. This is due to air
pollution and is not a fault. Do not cover the heater with picture film and do not
paint or print on it yourself. Otherwise, the heating element may be damaged and
the warranty will be void.
If you notice any noise, odour, visual changes or abnormally high temperature,
stop using and contact the manufacturer or its customer service.
Repairs
Repairs may only be carried out by authorised dealers or directly by the
manufacturer. If you attempt to modify the product or carry out repairs yourself,
your warranty will be invalidated.
21
Publicidad
