Tabla De Contenido; Safety & International Symbols - Senix BLAE12-M Manual Del Operador

TABLE OF CONTENTS
SAFETY & INTERNATIONAL SYMBOLS ..........................5
SAFETY INSTRUCTIONS ..................................................7
KNOW YOUR UNIT ..........................................................12
SPECIFICATIONS* ..........................................................12
ASSEMBLY ......................................................................12
OPERATION .....................................................................12
MAINTENANCE ...............................................................13
TROUBLESHOOTING .....................................................13
WARRANTY .....................................................................13
SAFETY & INTERNATIONAL
SYMBOLS
Some of the following symbols may be used on this
product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
product better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
Wh
Watt Hour
Ah
Amp Hour
Alternating
~
Current
Class II
Construction
Rotating
RPM
Speed
/min Per Minute
Wet
Conditions
Alert
Read The
Operator's
Manual
Eye
Protection
WWW.SENIXTOOLS.COM
DESIGNATION/
EXPLANATION
Voltage
Current
Frequency (cycles per
second)
Energy Storage Capacity
Current Capacity
Type or a characteristic of
current
Double-insulated
construction
Revolutions per minute
Revolutions, strokes,
surface speed, orbits, etc.,
per minute
Do not expose to rain or
use in damp locations.
To reduce the risk of
injury, user must read and
understand operator's
manual before using this
product.
Always wear eye protection
with side shields marked to
comply with ANSI Z87.1.
Safety Alert
Long Hair
Loose
Clothing
Keep
Bystanders
Away
Blower
Tubes
Impeller
Blades
The power
The power
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER
WARNING
Precautions that involve
your safety.
Failure to keep long hair
away from the air inlet could
result in personal injury.
Failure to keep loose
clothing from being drawn
into air intake could result in
personal injury.
Keep all bystanders at least
50 ft. away.
Do not operate without
tubes in place.
Rotating impeller blades
can cause severe injury.
Always keep the power
cable away from heat
sources, oils or sharp
edges. Immediately remove
plug from the mains if
the cable is damaged or
entangled.
WARNING! Turn the
machine OFF and
disconnect it from the power
supply before inspecting,
cleaning, changing
accessories or conducting
any other maintenance
task.
MEANING
Indicates an imminently
hazardous situation, which,
if not avoided, will result in
death or serious injury.
Indicates a potentially
hazardous situation, which,
if not avoided, could result
in death or serious injury.
5 - EN