Safety Instructions And Warnings - Emos E8636 Manual De Instrucciones

If you do not want to use the snooze function, press any button other
than SNZ/LIGHT when the alarm is ringing; the alarm will trigger
again the next day.
If you do not press any button while the alarm is ringing, the alarm
will be active for 2 minutes and will then trigger the next day.
Press the SNZ/LIGHT button while in standard mode to activate
display backlight for 5 seconds.
Memory for Measured Values
Press the button repeatedly to display the maximum and mini-
mum readings of indoor and outdoor temperatures.
To erase the memory, long-press the

Safety Instructions and Warnings

Read the user manual before using the device. Follow the safety
instructions provided in the manual. The product is designed to serve
reliably for many years if used properly.
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold or
humidity, and sudden changes in temperature.
• Do not place the product in locations prone to vibration and
shocks – may cause damage.
• Do not subject the product to excessive force, impacts, dust,
high temperatures or humidity – doing so may cause malfunc-
tion, shorten battery life, damage the batteries or deform the
plastic parts.
• Do not expose the product to rain or moisture if it is not designed
for outdoor use.
• Do not place any open flame sources on the product, e.g. a
lit candle, etc.
• Do not put the product in places with inadequate air flow.
• Do not insert any objects in the product's vents.
• Do not tamper with the internal electric circuits of the product
– doing so may damage the product and will automatically void
the warranty.
• To clean the product, use a slightly moistened soft cloth. Do not
use solvents or cleaning agents – they could scratch the plastic
parts and cause corrosion of the electric circuits.
button.
8