Cd Mode - auna Glastonbury DAB Manual De Instrucciones

EN
28

CD MODE

1. Press Mode button to enter CD mode.If there is no disc on the tray, it
shows "NO DISC".
2. Press the OPEN/CLOSE button on the unit to open the CD door.
3. Insert a CD in the disc tray with the label facing up and press the
button to close the CD door.
4. Use the controls on the unit or the remote to begin playing the loaded
disc.
STOP Function
• In CD mode, press the STOP button on the unit or hold and press the
REPEAT/STOP button on the remote , the player will enter stop state.
⏯
Press this button will start from first song and play in sequence.
Repeat Function
• In CD/USB mode, when playing music, pressing REPEAT for the first
time will repeat current playing. Pressing REPEAT twice will repeat the
whole disc. Press REPEAT three times to cancel repeat function.
Program Function
Programming tracks of disc are only possible when playback is stopped.
1. Press the STOP button on the unit or hold and press REAPEAT/STOP on
the remote control to enter STOP state.
2. Press PRESET button to enter program menu. The display will show
"PG".
3. Press "PREV/NEXT" button or number button to select the desired
track to be programmed. And press PRESET button to confirm. The
display will show P01.
4. Repeat the above step to store other desired tracks until all tracks are
programmed.
5. Press the PLAY/PAUSE button to start playback from the first
programmed track.
(Note: Hold and press STOP button twice to clear the program when the
disc is stopped).