Important Safety Instructions; Work Area; Personal Safety; Operational Safety - Goodway IRAM-EX-100 Instrucciones De Funcionamiento Y Mantenimiento

Important Safety Instructions

Warning! Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.

Work Area

• Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.

Personal Safety

• Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use tool while tired or under the influence of drugs, alcohol, or
medication.
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from moving parts.
• Do no overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in unexpected situations.
• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes,
hard hat, and hearing protection are recommended.

Operational Safety

• This unit is to be used only by trained operators.
• Keep clear of moving shaft. Make sure the shaft will not catch on anything while in use.
• Be sure to select the proper size flexible shaft and tool for the job. Do not force the
tool. Use the correct tool for the application.
• Check flexible shaft for weak or worn condition before each use. Make certain that all
connections are tight and secure.
• Do not use with flammable or explosive fluids such as gasoline, fuel oil, kerosene,
etc. Do not use in explosive atmospheres.
• Disconnect the plug from the power source and turn off water supply before
disconnecting hoses, fittings, or flexible shaft and before making any adjustments
or changing accessories. Such preventive safety measures reduce the risk of starting the
unit accidentally.
• Do not use tool if foot switch does not turn it on or off. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Store idle tools out of reach from children and other untrained persons. Tools are
dangerous in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
IRAM-EX-100 Manual 11/2017
SAVE THESE INSTRUCTIONS!!!