Publicidad
Idiomas disponibles
Idiomas disponibles
English
Clone Function
Note:
Make sure that the hard drive to which you want to transfer the data has the
same or higher capacity than the hard drive from which you want to copy.
All data which are on the target HDD will be overwritten during the copy
procedure! Therefore we recommend to save the old data before or to use an
empty hard drive.
Clone Function without PC
1.
Connect the power supply to the DC jack of the docking station and connect
the power supply to the socket-outlet.
2.
Insert the HDD / SSD from which you want to copy the data into slot HDD1
(Source).
3.
Insert the HDD / SSD on which you want to save the data into slot HDD2
(Target).
4.
Switch on the Docking Station.
5.
The red LED on both slots lights up permanently.
6.
Press the clone button twice in order to activate the clone process.
7.
The LED indicates a copy process.
8.
The copy process is completed as soon as all LEDs light up blue.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 08/2022
-4-
Publicidad
