Safety Information; Camera Parts - DATATEC FLIR ONE Serie Guía Rápida

2 EN-US English

2.6 Safety information

WARNING
Applicability: Digital devices subject to 2.1091/2.1093/KDB 447498/RSS-
102.
Radiofrequency radiation exposure Information: For body worn operation,
this device has been tested touched to the phantom and meets FCC RF expo-
sure guidelines. Nevertheless, the device should be used in such a manner
that the potential for human contact during normal operation is minimized.
CAUTION
Do not use the camera in temperatures more than 50°C (122°F), unless other
information is specified in the user documentation or technical data. High tem-
peratures can cause damage to the camera.
CAUTION
The temperature range through which you can charge the battery is ±0°C to
35°C (32°F to 95°F), except for the Korean market where the approved range
is 10°C to 35°C (50°F to 95°F). If you charge the battery at temperatures out
of this range, it can cause the battery to become hot or to break. It can also
decrease the performance or the life cycle of the battery.
Note FLIR Systems AB declares that the radio equipment type FLIR ONE ser-
ies is in compliance with Directive 2014/53/EU.
Note Radio operates in standard 802.11 b/g/n in frequency range 2400-2480
MHz and 5150-5260 MHz with max output power 15 dBm.

2.7 Camera parts

See 1 Illustrations, page 1.
1. On/Off button
2. Indicator LEDs
3. USB-C charging port
4. Visual camera
5. Thermal camera
#T810602; r. AA/86878/86878; mul 3