KUKKO 67-1 Instrucciones De Servicio página 9

KUKKO 67-1 and 67-2
• Always keep the unit clean.
• For all inquiries and spare parts ordering, please include the serial number in
all cases.
• Grease the guide spindle if necessary, however at least every six months.
Clean the spindle before greasing.
Recommended grease: KUKKO spindle grease Art.No. 699999
• Overloading of the spindle will result in the safety pin breaking. Whilst
the drive nut will still rotate, the spindle remains in its last po-sition ensuring
the spring remains compressed. Replace the safety pin as described.
• Remove the handgrip from around the drive nut by pulling away from the main
unit.
• Drive out the broken pin with a drift pin.
• Align the drilling of the spindle and the drive nut and drive in a new safety pin
(5x26 mm + 4x26 mm, ISO13337).
This tool carries a guarantee according to current law.
Conical Springs
Maintenance and Cleaning
Replacing the Safety Pin, Fig.C.5
Guarantee
Subject to change without notice
Ball Springs
9