Panasonic EY7441 Manual De Instrucciones página 7

III. ASSEMBLY
Attaching or Removing Bit
NOTE:
When attaching or removing a bit,
disconnect battery pack from tool or
place the switch in the center position
(switch lock).
This tool is equipped with a keyless drill
chuck.
1. Attachment
Insert the bit and turn the lock collar
clockwise (looking from the front) to
tighten firmly until it stops clicking.
2. Removal
Turn the lock collar counterclockwise
(looking from the front), then remove
the bit.
NOTE:
If excessive play occurs in the chuck,
secure the drill in place and 1 open
the chuck jaws by turning the lock collar
and 2 tighten the screw (left-handed
screw) with a screwdriver by turning
it counterclockwise (viewed from the
front).
EY7441_EY7940_Book.indb 7
All manuals and user guides at all-guides.com
Attaching or Removing Bat-
tery Pack
1. To connect the battery pack:
2. To remove the battery pack:
IV. OPERATION
[Main Body]
Switch Operation
1. The speed increases with the amount
2. A feedback electronic controller is used
3. The brake operates when the trigger
- 7 -
Line up the alignment marks and attach
the battery pack.
Slide the battery pack until it locks
●
into position.
Alignment marks
Push on the button from the front to
release the battery pack.
Button
of depression of the trigger. When
beginning work, depress the trigger
slightly to start the rotation slowly.
to give a strong torque even in low
speed.
i s r e l e a s e d a n d t h e m o t o r s t o p s
immediately.
NOTE:
When the brake operates, a braking
sound may be heard. This is normal.
2010-6-22 15:57:40