Safety Instructions; General Safety Warnings; Personal Safety; Work Area - Hilti SF151-A Manual De Instrucciones

Battery
Energy content
Weight
Temperature monitoring
Type of cell
No. of cells

5. Safety instructions

NOTE
The safety rules in section 5.1 contain all general
safety rules for power tools. The instructions at
5.1.2a, 5.1.2d, 5.1.2e, 5.1.3c and 5.1.4c are not
relevant to this power tool.

5.1 General safety warnings

WARNING! Read all instructions! Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury. The term "power tool" in
all of the warnings listed below refers to your mains-
operated (corded) power tool or battery-operated
(cordless) power tool. SAVE THESE INSTRUCTIONS.

5.1.1 Work area

a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.

5.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070659 / 000 / 00
All manuals and user guides at all-guides.com
SFB 150
31.2 Wh
0.94 kg
Yes
Nickel-cadmium SUB C size
13
d) Do not abuse the cord. Never use the cord for
e) When operating a power tool outdoors, use an

5.1.3 Personal safety

a) Stay alert, watch what you are doing and use
b) Use safety equipment. Always wear eye pro-
c) Avoid accidental starting. Ensure the switch is
d) Remove any adjusting key or wrench before
e) Do not overreach. Keep proper footing and bal-
f) Dress properly. Do not wear loose clothing or
SFB 155
46.8 Wh
0.96 kg
Yes
Nickel-metal hydride SUB C size
13
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
tection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions will reduce
personal injuries.
in the off-position before plugging in. Carrying
power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
ance at all times. This enables better control of
the power tool in unexpected situations.
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
en
19