oraimo UltraCleaner S Guía De Bienvenida página 3

Charge Your Vacuum
Charging Mode 1
Directly insert into the charging socket of the battery pack to charge
Motorized brush blocked:
Red lights flashing
LED Indicator
No power
Being charged
Fully charged
Lights off
Charging Mode
2
1. Slide the battery pack release
button backward with your fingers.
3. Plug in the charging socket of the battery pack for charging.
Host battery pack
charging socket
Attention
1. It is a normal phenomenon that the vacuum may heat up during charging.
2. Make sure to charge the vacuum cleaner with the power adapter included in the package.
adaptor
Host battery pack
charging socket
household
power socket
Status
Lights flashing Lights on
2. Lift up and remove the battery pack.
adaptor
household
power socket
. 3 .
Clean and Replace The Dust Container and HEPA Filter
1. Be sure to dry the filter and filter cover completely.
3. Put the filter case back into the dust container.
Clean the Roller Brush
1. Disconnect the power supply and
slide the brush lock to the right.
2. Wash filter and filter cover.
2. Slide the brush latch to the
unlocked state.
. 4 .