Publicidad
shelving
unit
3-TIER
Contents:
(a) – 3x Shelves
(b) – 4x Legs
(c) – 2x Spacer blocks
(d) – 24x Screws
(e) – 4x 55mm Screws
(f) – 4x 6mm Wall Plugs – masonry
Tools Required:
Screwdriver
6mm Masonry drill bit
Drill
All manuals and user guides at all-guides.com
Assembly Instructions
• Loosely attach ahelves (a) to legs (b)
through pre-drilled holes using 40mm
screws (d), at desired heights. Take
care to locate screws into predrilled
positions on the shelf. Do not tighten
the screws yet.
• Ensure all shelves are flush with legs
and unit is square then fully tighten
screws.
Wall Fixing
• Hold assembled unit against wall in
the desired position ensuring that unit
is level. Mark wall throught pre-drilled
holes of unit.
• Using a 6mm masonry bit, drill four
holes at pre-drilled positions as per
detail. Plug wall using wall plugs, (f)
provided and secure unit to wall using
60mm screws (e) provided. If wall has
skirting use two spacer blocks (c)
provided to fill gap (see detail).
Note:
For added stability, load from bottom up.
Made in Poland for
Finishing Touches International Ltd
customerservices@ftintl.co.uk
Publicidad
