Publicidad
Idiomas disponibles
Idiomas disponibles
English
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when installing the card
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2.
Open the housing.
3.
Remove the slot holder from the available PCI Express slot.
4.
Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
5.
Use a screw to attach the card to the housing.
6.
Connect a SATA power cable of your power supply to the PCI Express card.
7.
Reattach the housing and connect the power cord to the AC adapter.
Driver Installation
Windows 8.1/8.1-64/10/10-64/11
1.
When the installation of the device is finished, the driver will be automatically
installed after you restart the computer.
2.
You can now start to use the device.
Windows 7/7-64
1.
Switch on your computer.
2.
Put the driver CD in the CD ROM drive.
3.
Open Windows Explorer, select: CD-drive\USB3.0 Host\NEC\Setup.exe.
4.
Follow the instructions of the driver installation.
5.
Restart your system after the installation.
6.
After restart you can start using the device immediately.
-3-
Publicidad
