Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY & INSTALLATION
INITIAL SETUP
Before connecting the fridge to the power source, let it stand upright
for approximately 24 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during
transportation.
Once you have plugged the unit into an electrical outlet, let the unit run for at
least 30 minutes to acclimate before making any adjustments.
BEFORE YOU START
Your fridge was designed to store a maximum number of bottles and cans
securely. We recommend that you observe the tips below to optimize loading:
• Remove tape from shelves once unit is stable and ready for storage.
• Make sure that the weight of the bottles/cans between the top and bottom
drawers is roughly the same, to prevent tipping.
• Never pull out both drawers at the same time—always close one drawer
before opening the other.
The fridge should be placed in a location where the ambient temperature is
between 61°-109°F (16°-43°C). If the ambient temperature is outside this
range, the cooling performance of the fridge may be negatively affected. For
example, placing your unit in extremely cold or hot conditions may cause
interior temperatures to fluctuate more often.
www.newair.com
EN
9
Publicidad
